DITL_16320_Max PixMap Count Exceeded Cloning.txt
Items: (3 entries)
  0:
    Bounds: x1=175, y1=120, x2=249, y2=143
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=385, y2=107
    Type: -120
    Info: 'Current 3DMF model structure and pixmaps content has resulted in pixmap cloning for a total number of pixmaps in excess of the currently supported limit of ^0. You may be able to import this map if you re-export it with a simpler hierarchy or fewer maps.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16310_Max PixMap Count Exceeded.txt
Items: (3 entries)
  0:
    Bounds: x1=181, y1=112, x2=255, y2=135
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=68, y1=9, x2=364, y2=92
    Type: -120
    Info: 'Current 3DMF model contains pixmaps in excess of the currently supported limit of ^0. You may be able to import this model if you re-export it with fewer embedded maps.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16300_Newer 3DMF version.txt
Items: (4 entries)
  0:
    Bounds: x1=264, y1=112, x2=342, y2=132
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=80, y1=1, x2=386, y2=100
    Type: -120
    Info: 'This 3DMF model file is post version 1.1 QD3D which may not import correctly. Do you wish to proceed with import ?'
  2:
    Bounds: x1=20, y1=12, x2=52, y2=44
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=113, y1=112, x2=191, y2=132
    Type: 4
    Info: 'Cancel'

DITL_16290_Older 3DMF version.txt
Items: (4 entries)
  0:
    Bounds: x1=264, y1=112, x2=342, y2=132
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=80, y1=1, x2=386, y2=100
    Type: -120
    Info: 'This 3DMF model file is a pre version 1.0 QD3D which may not import correctly. Do you wish to proceed with import ?'
  2:
    Bounds: x1=24, y1=12, x2=56, y2=44
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=113, y1=112, x2=191, y2=132
    Type: 4
    Info: 'Cancel'

DITL_16280_mesh holes.txt
Items: (4 entries)
  0:
    Bounds: x1=127, y1=112, x2=205, y2=132
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=82, y1=1, x2=388, y2=100
    Type: -120
    Info: 'Model file '^0'  contains a mesh primitive with contours (holes). Mesh contours are not currently supported. They will be dropped on import. Do you wish to continue with import ?'
  2:
    Bounds: x1=20, y1=9, x2=52, y2=41
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=273, y1=113, x2=351, y2=133
    Type: 4
    Info: 'Continue'

DITL_16270_unsupported pixel size.txt
Items: (3 entries)
  0:
    Bounds: x1=169, y1=111, x2=247, y2=131
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=79, y1=0, x2=385, y2=99
    Type: -120
    Info: 'File '^0' contains a pixelmap with pixel size ^1. Currently only support 32 bit pixels. You may be able to export your model from the original application using 32 bit pixmaps.'
  2:
    Bounds: x1=22, y1=8, x2=54, y2=40
    Type: -96
    Info: ' €'

DITL_16260_no geometry found.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=10, x2=299, y2=76
    Type: -120
    Info: 'Did not find any geometry objects in 3DMF file '^0.'  Terminating import.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16250_error reading an object.txt
Items: (4 entries)
  0:
    Bounds: x1=127, y1=112, x2=205, y2=132
    Type: 4
    Info: 'Cancel'
  1:
    Bounds: x1=82, y1=1, x2=388, y2=100
    Type: -120
    Info: 'Object  number '^0'  of type '^1' did not import successfully while reading file '^2'. Do you wish to continue with import ?'
  2:
    Bounds: x1=24, y1=10, x2=56, y2=42
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=273, y1=113, x2=351, y2=133
    Type: 4
    Info: 'Continue'

DITL_16240_unrecognized object type.txt
Items: (4 entries)
  0:
    Bounds: x1=264, y1=112, x2=342, y2=132
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=80, y1=1, x2=386, y2=100
    Type: -120
    Info: 'File '^0' contains a 3DMF primitive of type  '^1' which is unrecognized by the 3DMF parser. You may be able to export your model from the original application using standard 3DMF primitives. Do you wish to continue with import ?'
  2:
    Bounds: x1=20, y1=7, x2=52, y2=39
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=113, y1=112, x2=191, y2=132
    Type: 4
    Info: 'Cancel'

DITL_16230_Max Object Count Exceeded.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=71, y1=10, x2=300, y2=76
    Type: -120
    Info: 'Current 3DMF model has more than ^0 individual geometry objects which exceeds the currently supported limit.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16220_Max Object Group Depth Exceeded.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=75
    Type: -120
    Info: 'Current 3DMF model has group nesting which exceeds the currently supported limit of ^0.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16210_Error on export.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=75
    Type: -120
    Info: 'Encountered an error while trying to export current model in 3DMF format to file '^0.''
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16200_Error on import.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=75
    Type: -120
    Info: 'Encountered an error while trying to import contents of 3DMF model file '^0.''
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16150_Unsupported 3DMF Geometry Object.txt
Items: (4 entries)
  0:
    Bounds: x1=264, y1=112, x2=342, y2=132
    Type: 4
    Info: 'Continue'
  1:
    Bounds: x1=80, y1=1, x2=386, y2=100
    Type: -120
    Info: 'File '^0' contains a 3DMF primitive of type  '^1' which is not currently supported. You may be able to export your model from the original application using meshes or trigrids. Do you wish to continue with import ?'
  2:
    Bounds: x1=20, y1=13, x2=52, y2=45
    Type: -96
    Info: ' €'
  3:
    Bounds: x1=113, y1=112, x2=191, y2=132
    Type: 4
    Info: 'Cancel'

DITL_16110_Out of Memory.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=75
    Type: -120
    Info: 'Application ran out of memory. Please increase your memory and restart.'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16100_read 3dmf object failed.txt
Items: (3 entries)
  0:
    Bounds: x1=138, y1=95, x2=212, y2=118
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=75
    Type: -120
    Info: 'Read failed for ^0 3DMF object(s) in model file. These objects have been ignored!'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16091.txt
Items: (3 entries)
  0:
    Bounds: x1=157, y1=99, x2=231, y2=122
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=78, y1=7, x2=307, y2=53
    Type: -120
    Info: 'Can't read this version of 3DMF  Ò^0Ó'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16090_open 3dmf file failed.txt
Items: (3 entries)
  0:
    Bounds: x1=157, y1=99, x2=231, y2=122
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=70, y1=9, x2=299, y2=55
    Type: -120
    Info: 'Open failed for model file  Ò^0Ó'
  2:
    Bounds: x1=5, y1=15, x2=37, y2=47
    Type: -96
    Info: '—'

DITL_16060_Check.txt
Items: (3 entries)
  0:
    Bounds: x1=302, y1=106, x2=360, y2=126
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=74, y1=10, x2=360, y2=93
    Type: -120
    Info: '^0'
  2:
    Bounds: x1=16, y1=10, x2=48, y2=42
    Type: -96
    Info: ' €'

DITL_16050_Report Error.txt
Items: (3 entries)
  0:
    Bounds: x1=302, y1=106, x2=360, y2=126
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=74, y1=10, x2=360, y2=93
    Type: -120
    Info: '^0'
  2:
    Bounds: x1=17, y1=10, x2=49, y2=42
    Type: -96
    Info: ' €'

DITL_16003_model parms.txt
Items: (11 entries)
  0:
    Bounds: x1=186, y1=128, x2=246, y2=151
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=109, y1=128, x2=167, y2=151
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=106, y1=36, x2=160, y2=52
    Type: 16
    Info: '250'
  3:
    Bounds: x1=106, y1=61, x2=160, y2=77
    Type: 16
    Info: '250'
  4:
    Bounds: x1=78, y1=92, x2=232, y2=108
    Type: -120
    Info: 'Requires ^0 ^1'
  5:
    Bounds: x1=54, y1=36, x2=98, y2=52
    Type: -120
    Info: 'Width'
  6:
    Bounds: x1=167, y1=36, x2=208, y2=52
    Type: -120
    Info: 'Pixels'
  7:
    Bounds: x1=54, y1=61, x2=98, y2=77
    Type: -120
    Info: 'Height'
  8:
    Bounds: x1=167, y1=61, x2=208, y2=77
    Type: -120
    Info: 'Pixels'
  9:
    Bounds: x1=16, y1=14, x2=250, y2=117
    Type: -128
    Info: ''
  10:
    Bounds: x1=40, y1=6, x2=153, y2=22
    Type: -120
    Info: '3D View Window'

DITL_16000.txt
Items: (7 entries)
  0:
    Bounds: x1=215, y1=138, x2=283, y2=158
    Type: 4
    Info: 'OK'
  1:
    Bounds: x1=142, y1=138, x2=206, y2=158
    Type: 4
    Info: 'Cancel'
  2:
    Bounds: x1=151, y1=56, x2=226, y2=72
    Type: 16
    Info: '200'
  3:
    Bounds: x1=151, y1=90, x2=226, y2=106
    Type: 16
    Info: '200'
  4:
    Bounds: x1=93, y1=7, x2=215, y2=28
    Type: -120
    Info: '3D View Vindow'
  5:
    Bounds: x1=94, y1=56, x2=145, y2=72
    Type: -120
    Info: 'Width:'
  6:
    Bounds: x1=94, y1=90, x2=144, y2=106
    Type: -120
    Info: 'Height:'